Copper Pipes supplier in europe
SUPPLIER COPPER & BRASS TUBES TO EUROPE FOR DECADES
Request a Call Back
Copper pipes carry water, gas, and refrigerant through buildings, ships, and factories across Europe. Brassco Tube Industries manufactures them from pure copper and copper alloys such as brass and bronze, with outer diameters from 4 mm to 150mm and wall thickness from 0.25mm to 8 mm. Straight lengths run up to 6 metres, while coils and flexible tubing cover installations where a straight run won’t fit. Every pipe meets ASTM B111, B75, B280, and B68, along with the equivalent ASME standards.
ASME SB280 Copper Alloy Seamless Pipe, Seamless Copper Pipes, Copper Pipe, Copper Pipe Suppliers
SB280 copper alloy seamless pipes handle water supply, drainage, and gas distribution lines without the joint failures that are common in welded alternatives. Their seamless construction removes weak points along the wall, so pressure holds steady even under thermal cycling. HVAC systems and refrigeration units rely on this same wall integrity, since copper conducts heat efficiently enough to keep condenser and evaporator coils performing without added surface area. Fire sprinkler networks and electrical conduit runs use these pipes too, drawing on copper’s conductivity and resistance to arc damage.
Corrosion resistance keeps maintenance intervals long. A properly installed copper line in a standard water system runs 50 years or more before replacement enters the conversation. Soldered and brazed joints seal fast, cutting installation labor compared to threaded steel fittings. Copper also holds up under repeated freeze-thaw stress without the cracking that affects PVC in cold climates. At the end of its service life, copper scrap retains most of its material value, so recycling recovers a real percentage of the original cost rather than sending the pipe to landfill.
We manufacture sb280 seamless copper tubes for plumbing, HVAC, and electrical wiring applications. Each batch is subject to in-house quality control checks at each stage of production, from tube drawing to final dimensional inspection, so that all meet ASTM SB280 tolerances before shipping. Contact Brassco Tube Industries for a quote on the diameter and wall thickness you need.
Manufacturing Process
Melting & Casting: Raw copper is melted and cast into solid billets, the stock from which all pipes are made.
Extruding, Drawing & Pilgering: Each billet is forced through a die by a press to open a bore while drawing and pilgering close in on the final diameter and wall thickness.
Cutting: Pipes are cut to standard stock lengths or to the buyer’s exacting specification.
Packing & Inspection: Every batch goes through a finish and dimensional check before it gets boxed and readied to
Annealing: Heat treatment softens the copper back down, so it bends and forms without cracking on site.
Copper Pipes Specification
| Standard | ASTM B111 / ASTM B75 / ASTM B280 / ASTM B68 / ASME SB111 / ASME SB75 / ASME SB280 / ASME SB68 |
| Material | Copper |
| Outer Diameter(OD) | 4mm-150mm |
| Wall Thickness : | 0.25mm-8mm |
| Length | 1 meter-6 meter or as required |
| Types | Seamless Pipes, Pipe / Light Drawn Pipe / Light Annealed Pipe / Bright Pipe / Annealed Pipe, Annealed Pipe, Full Annealed Pipe, Hard Drawn Pipes |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Pipe for ACR and Refrigeration 4. Inner-grooved copper Pipe for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6. Semi-finished Copper Pipe for industrial applications |
Brassco Tube Industries is a leading Copper Pipes Manufacturer, Supplier & Stockist in EUROPE.
Manufacturing Process
Melting & Casting
Extruding, Drawing & Pilgering
Cutting
Packing & Inspection
Annealing
Types Of Copper Pipes
Copper Round Pipe
Copper Seamless Pipe
Copper Condenser Pipe
Other Types Of Copper Pipes
- Copper Hard Drawn Pipes
- ASTM B68 Copper Alloy Pipes
- ASTM B68 Copper Alloy Pipes
- Copper Alloy Light Drawn Pipe
- Copper Seamless Pipe
- Copper Alloy Pipes
- ASME SB 280 Copper Pipes
- Copper Rectangle Pipes
- Copper Seamless Condenser Pipes
- ASTM B88 Seamless Copper Water Pipe
- Copper Soft Pipes
- ASTM B111 Copper Piping
- Copper Pipe 3/8
- Copper Pipe 1/2
- Copper Alloy Pipe 1/4
- ASTM B280 Copper Alloy Pipe
- ASTM B280 Copper Seamless Pipe
- Copper Pipes
- Copper Alloy Pipe
- Copper Alloy Light Drawn Pipe
- Copper Alloy Pipe 5/8
- Annealed Copper Alloy Pipe
- Copper Annealed Pipe
- Copper Pipe 3/4
- Copper Alloy Pipes
- Annealed Copper Alloy Pipe
- Copper Heat Exchanger Pipes
- Copper Pipe For Water And Gas
- Copper Pipe Half Hard
- Copper Alloy Square Pipes
- Copper Rectangular Pipes
- Half Hard Copper Pipe
- ASME SB 75 Copper Alloy Pipe
- Copper Alloy Round Pipe
- Copper Pipe Hvac
- Copper Alloy Seamless Pipes
- Copper Pipe
- Copper Soft Pipe
Application Industries for Copper Pipes
Copper pipe fits into six core industries across Europe, and each one comes with its own pressure, size, and finish requirements.
Plumbing and HVAC: Water supply, drainage, and refrigerant lines rely on copper for its corrosion resistance and reliable joints.
Architecture: Architects specify copper for roofing, cladding, and decorative piping where long-term weathering matters.
Automotive: Fuel lines, brake lines, and radiator components use small-diameter copper tubing for its formability and pressure rating.
Electrical Industry: The metal’s conductivity is crucial for safe and low-resistance earthing in copper bus tubes and earthing systems.
Copper pipe: used in fuel & gas industry gas distribution and fuel transport lines with pressure rated and leak tight joints
Marine Applications: Copper and copper-nickel grades are used for seawater cooling and freshwater systems piping on board to withstand saltwater.
FAQs
What types of copper pipes do you supply in Europe?
We supply seamless, light drawn, annealed, bright, and hard drawn pipe, plus pancake and LWC coils for ACR and refrigeration work.
What grades of copper pipes are available?
Grades include C10100, C10200, C10300, C10800, C11000, C12000, C12200 and C14200, for plumbing, electrical and general engineering requirements.
Do you export copper pipes to European countries?
Yes, we ship regularly to Germany, France, the UK, Italy, Spain, the Netherlands, Sweden, Switzerland, Belgium, and Poland.
Are copper pipes available in different sizes and lengths?
Outer diameters range from 4 mm to 150mm, wall thickness from 0.25mm to 8mm, and standard lengths run 1 to 6 metres.
Can you provide custom-cut copper pipes?
Custom cutting is available on request, with lengths and tolerances matched to your project drawings or purchase order.
How can I request a quote for copper pipes in Europe?
Send your specifications, grade, and quantity through our contact form, and our team responds with pricing within 1 to 2 business days.
Products