Copper C10800 Pipes Supplier in Europe
SUPPLIER COPPER & BRASS TUBES TO EUROPE FOR DECADES
Request a Call Back
Different sizes and configurations of copper C10800 pipes are available to meet diverse requirements. They have different outer diameters, wall thicknesses, and lengths, allowing customization based on particular needs. These products are made according to industrial standards to achieve uniformity in quality and performance.
What are Copper C10800 Pipes?
- High Conductivity: Features an electrical resistivity of around 11.3 microhm-cm, allowing current and heat to pass with minimal loss.
- Electrical & Thermal Applications: Ideal for use in bus bars, connectors, and coil work due to its efficient energy transfer.
- Corrosion Resistance: Withstands humid, marine, and chemically active environments without needing a protective coating.
- Piping Applications: Commonly utilized in plumbing lines, gas lines, and buried piping systems.
- Mechanical Formability: Can be easily bent, flared, and formed on-site without cracking.
- Versatile Tempers: Can be ordered as hard drawn, half-hard, or fully annealed to match specific forming requirements.
- Customizable Dimensions: Wall thickness and diameter can be adjusted within standard limits, making it equally suitable for complex heat exchanger coils, condenser tube bundles, or straight water pipes.
- Long-term Durability: Requires very low maintenance once installed and retains these structural and chemical properties over its normal service life.
What are Copper C10800 Pipes?
Copper C10800 pipes are seamless copper tubes made from an alloy close to pure copper, with small additions of silver and phosphorus, listed under the UNS C10800 designation. The silver content raises the softening temperature compared to plain copper grades, while conductivity stays close to that of pure copper. These pipes sit within our broader copper pipes range and are produced by extrusion, drawing and annealing, then supplied straight or in coils. Outer diameter is available from 4mm to 150mm, wall thickness between 0.25mm and 8mm, in lengths of 1 to 6 metres. These pipes are mainly ordered for electrical, plumbing and HVAC work.
Copper C10800 Pipes Specification
Copper C10800 pipes offer several benefits over alternative materials. Its great conductance ensures no power wastage within electrical or heating appliances, reducing energy costs. They also possess durability features; thus, only minimal maintenance practices are needed throughout their life cycle. The ease with which one can install them, plus the ability to modify them according to different applications, makes this type preferable over others. In addition, such pipes never fail even under extreme conditions since they resist corrosion perfectly well.
Copper C10800 pipes are our area of expertise. They are best known for being highly conductive, durable, and versatile. We ensure that they will fit any requirement by following the strictest industry guidelines and manufacturing them with precision. Depending on where you want to use them, they can be used in electricity wires, plumbing systems, or heat exchangers.
| Standard | ASTM B111 / ASTM B75 / ASTM B280 / ASTM B68 / ASME SB111 / ASME SB75 / ASME SB280 / ASME SB68 |
| Material | Copper |
| Outer Diameter(OD) | 4mm-150mm |
| Wall Thickness : | 0.25mm-8mm |
| Length | 1 meter-6 meter or as required |
| Types | Seamless Pipes, Pipe / Light Drawn Pipe / Light Annealed Pipe / Bright Pipe / Annealed Pipe, Annealed Pipe, Full Annealed Pipe, Hard Drawn Pipes |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Pipe for ACR and Refrigeration 4. Inner-grooved copper Pipe for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6. Semi-finished Copper Pipe for industrial applications |
Brassco Tube Industries is a leading Copper C10800 Pipes Manufacturer, Supplier & Stockist in Europe.
Manufacturing Process
Melting & Casting
Extruding, Drawing & Pilgering
Cutting
Packing & Inspection
Annealing
Types Of Copper C10800 Pipes
Copper C10800 Round Pipe
Copper C10800 Seamless Pipe
Copper C10800 Condenser Pipe
Other Types of Copper C10800 Pipes
- Copper C10800 Seamless Pipes
- Copper C10800 Pipes
- Copper C10800 Soft Pipes
- Copper C10800 Hard Drawn Pipes
- Copper C10800 Half Hard Pipes
- Copper C10800 Annealed Pipes
- Copper Alloy C10800 Light Drawn Pipes
- UNS C10800 Copper Soft Pipes
- Copper C10800 Rectangular Pipes
- C10800 Copper HVAC Pipes
- Copper C10800 Heat Exchanger Pipes
- C10800 Copper Alloy Square Pipes
- Copper C10800 Water and Gas Pipes
- Copper C10800 Round Pipes
Copper C10800 Pipes Chemical Composition
| Grade | Cu | Ph |
| C10800 | Includes Ag + P | 0.005 – 0.012 |
Mechanical Properties of Copper C10800 Pipes
| Density (lb / cu. in.) | Electrical Resistivity (microhm-cm (at 68 Deg F)) | Melting Point (Deg F) | Mean Coeff Thermal Expansion | Modulus of Elasticity Tension |
| 0.323 | 11.3 | 1981 | 9.4 | 17000 |
Why Choose Our Copper C10800 Pipes?
We at Brassco Tubes manufacture Copper C10800 pipes to ASTM B68, B75, B111, B280 and B88, and the matching ASME SB specifications, so material certificates match what site inspectors expect. Sizes follow the outer diameter, wall thickness and length you specify rather than a fixed catalogue, covering seamless, soft, hard drawn and annealed pipe in round, square or rectangular sections. Pipe can also be supplied pickled, bright annealed or plain mill finish, based on end use. Each batch is checked under our internal quality assurance process before dispatch, with dimensions and composition tested against the applicable standard. We have supplied copper and brass tube to plumbing, HVAC, electrical and marine projects across Europe for several decades.
Application Industries for Copper C10800 Pipes
FAQs
What pipe forms are available in Copper C10800?
Copper C10800 pipes are supplied as seamless, soft, hard drawn, half hard, light drawn and annealed pipe, in round, square and rectangular sections, from small fractional sizes up to larger bore.
Are Copper C10800 pipes corrosion-resistant?
Yes. The alloy resists corrosion well in humid, marine and underground conditions, which is one reason it is specified for plumbing, gas and water lines without added coatings.
Why choose Copper C10800 Pipes over other copper grades?
The added silver and phosphorus raise resistance to softening at higher temperatures compared with plain copper grades, while conductivity and corrosion resistance stay close to pure copper levels.
Products